Toorx Professional AVANT FWX-6350 Incline Chest Press

The Toorx Professional AVANT FWX-6350 Incline Chest Press is a plate loaded chest press machine on which you press upwards at an incline, for targeted training of your chest muscles with the emphasis on the upper chest. The lever system with an independent, converging press movement lets both sides work evenly, with a maximum load of 300 kg. A logical choice for gyms, PT studios and home gyms that want to complete their chest training.

Toorx Professional AVANT FWX-6350 Incline Chest Press at a glance

• Incline press movement: you press upwards at an angle, so you target the upper part of your chest.
• Independent lever arms: both sides move separately, so your stronger side cannot take over the work.
• Plate loaded up to 300 kg: you load the lever with weight plates you buy yourself and increase the load step by step.
• Seat height in 13 positions: you match the movement to your own body height.
• Firm pads: high-density foam with PU upholstery and a fully padded back pad for a stable posture.
• Heavy steel frame: rectangular steel tubes of 50 x 80 mm with a 3 mm wall thickness with a double, scratch-resistant powder coating.

Incline chest press with converging lever

On the FWX-6350 you press the handles upwards and forwards at an angle from a seated position. The lever system guides them along a converging path towards each other, so your chest muscles do the work and the movement stays clean. Because both sides move independently, you train left and right evenly and notice straight away when one side lags behind. Combine the incline press with a flat chest press for complete chest training.

Comfort and adjustment

The seat height of the FWX-6350 adjusts in 13 positions, so both shorter and taller users have the handles at the right height. The pads are made of high-density foam with PU upholstery, with a fully padded back pad. This keeps you stable and focused on the muscles you are training, even during the last heavy reps of a set.

Construction and load capacity

The frame is built from heavy rectangular steel tubes of 50 x 80 mm with a 3 mm wall thickness. The tubes are sandblasted and phosphated and then finished with a double, scratch-resistant powder coating that stands up to intensive use. Power Grade bearings ensure a smooth and precise movement, even with a heavily loaded lever. The maximum load is 300 kg and the machine is suitable for users up to 150 kg. The FWX-6350 meets EN20957-1 and EN957-2 class S and is therefore built for intensive, professional use.

Plate loaded: weight plates and space

As a plate loaded machine, the FWX-6350 works with weight plates you buy yourself; weights are not included. This lets you decide in which steps you increase the load. The machine measures 190 x 160 x 169 cm (l x w x h) and weighs 126 kg. Allow some free space around it to load plates and to get in and out easily. It is a machine for a permanent spot in a gym, PT studio or home gym.

Good to know

The FWX-6350 is made for one exercise: the incline chest press. If you are looking for a machine to train your whole body, a home gym station makes more sense. Weighing 126 kg and measuring 160 cm wide, it is also a substantial machine that you set up properly once and then leave in place.

Frequently asked questions about Toorx Professional AVANT FWX-6350 Incline Chest Press

What is the difference between an incline and a regular chest press?

On an incline chest press you press upwards at an angle instead of straight forward. This puts more emphasis on the upper part of your chest. A regular chest press targets the chest as a whole. Many athletes use both variations for complete chest training.

Is the FWX-6350 suitable for beginners?

Yes, the fixed movement path makes the exercise easy to learn and safe to dose. You start with few or no weight plates and build up the load gradually. With the seat height in 13 positions you adjust the machine to your body height. Experienced athletes can load it heavily up to a maximum load of 300 kg.

Are weight plates included with the FWX-6350?

No, the FWX-6350 is supplied without weights. It is a plate loaded machine: you load the lever with weight plates you buy yourself. This lets you match the load exactly to your own level and increase it gradually. The maximum load of the machine is 300 kg.

How much space do you need for the FWX-6350?

The machine measures 190 x 160 x 169 cm (length x width x height) and weighs 126 kg. Leave some free space around it to load weight plates and to get in and out safely. Place the machine on a level, solid floor. As it does not fold, it needs a permanent spot in your training area.

Is the FWX-6350 suitable for home use?

Yes, if you have a home gym with enough space. The machine is built to EN957-2 class S for intensive professional use, so at home you have plenty in reserve. Do take the size into account, as well as the weight plates you need with it. It is especially interesting if you are expanding your home gym with dedicated, targeted strength machines.

Warranty

Home

• Labour: 2 years
• Parts: 5 years (excluding wear parts such as bearings, pulleys, pads, handles and cables)
• Frame: lifetime

Professional

• Labour: 1 year
• Parts: 3 years (excluding wear parts such as bearings, pulleys, pads, handles and cables)
• Frame: 10 years