Toorx Professional AVANT FWX-6750 Circular Lat Pulldown

The Toorx Professional AVANT FWX-6750 Circular Lat Pulldown is a plate loaded lat pulldown machine for targeted back training, with your biceps as a supporting muscle group. Via a lever mechanism with an independent, diverging pulling movement each arm works separately, with a maximum load of 300 kg. With a height of 185 cm, this machine also fits rooms with a lower ceiling, from gyms and PT studios to home gyms.

Toorx Professional AVANT FWX-6750 Circular Lat Pulldown at a glance

• Diverging pulling movement: the handles move apart as you pull, for controlled training of your back and biceps.
• Independent lever arms: both sides move separately, so your stronger side cannot take over the work.
• Plate loaded up to 300 kg: you load the lever with weight plates you buy yourself and increase the load step by step.
• Seat height in 13 positions: you match the movement to your own body height.
• Firm pads: high-density foam with PU upholstery and a fully padded back pad for a stable posture.
• Heavy steel frame: rectangular steel tubes of 50 x 80 mm with a 3 mm wall thickness with a double, scratch-resistant powder coating.

Back training with a diverging lever

On the FWX-6750 you sit under the handles and pull them down towards your shoulders. The lever mechanism guides them along a diverging path, with the handles moving apart as you pull. Your back muscles do most of the work, while your biceps assist. Because both arms move independently, you pull equally hard on the left and right and notice straight away when one side lags behind.

Comfort and adjustment

The seat height of the FWX-6750 adjusts in 13 positions, so both shorter and taller users have the handles at the right height. The pads are made of high-density foam with PU upholstery, with a fully padded back pad. This keeps you stable and focused on the muscles you are training, even during the last heavy reps of a set.

Construction and load capacity

The frame is built from heavy rectangular steel tubes of 50 x 80 mm with a 3 mm wall thickness. The tubes are sandblasted and phosphated and then finished with a double, scratch-resistant powder coating that stands up to intensive use. Power Grade bearings ensure a smooth and precise movement, even with a heavily loaded lever. The maximum load is 300 kg and the machine is suitable for users up to 150 kg. The FWX-6750 meets EN20957-1 and EN957-2 class S and is therefore built for intensive, professional use.

Plate loaded: weight plates and space

As a plate loaded machine, the FWX-6750 works with weight plates you buy yourself; weights are not included. This lets you decide in which steps you increase the load. The machine measures 155 x 130 x 185 cm (l x w x h). Allow some free space around it to load plates and to get in and out easily. It is a machine for a permanent spot in a gym, PT studio or home gym.

Good to know

The FWX-6750 is a specialist machine for the lat pulldown. If you want to train your whole body with one machine, a home gym station makes more sense. At 155 x 130 cm the machine is relatively short, but because of its 130 cm width you do need space at the sides to load plates.

Frequently asked questions about Toorx Professional AVANT FWX-6750 Circular Lat Pulldown

Which muscles do you train with the FWX-6750?

The FWX-6750 mainly trains your back muscles, with the biceps as a supporting muscle group. You pull the handles down towards your shoulders from a seated position. The fixed path of the lever keeps the focus on your back. That makes the machine a good foundation for any back workout.

What does diverging pulling mean?

With diverging pulling, the handles move apart during the exercise. The FWX-6750 combines this with independent lever arms, so each arm does its own work. This keeps the movement controlled and focused on your back muscles. You also notice straight away when one side delivers less strength than the other.

Are weight plates included with the FWX-6750?

No, the FWX-6750 is supplied without weights. It is a plate loaded machine: you load the lever with weight plates you buy yourself. This lets you match the load exactly to your own level and increase it gradually. The maximum load of the machine is 300 kg.

How much space do you need for the FWX-6750?

The machine measures 155 x 130 x 185 cm (length x width x height). Leave some free space around it to load weight plates and to get in and out safely. Place the machine on a level, solid floor. As it does not fold, it needs a permanent spot in your training area.

Is the FWX-6750 suitable for home use?

Yes, if you have a home gym with enough space. The machine is built to EN957-2 class S for intensive professional use, so at home you have plenty in reserve. Do take the size into account, as well as the weight plates you need with it. It is especially interesting if you are expanding your home gym with dedicated, targeted strength machines.

Warranty

Home

• Labour: 2 years
• Parts: 5 years (excluding wear parts such as bearings, pulleys, pads, handles and cables)
• Frame: lifetime

Professional

• Labour: 1 year
• Parts: 3 years (excluding wear parts such as bearings, pulleys, pads, handles and cables)
• Frame: 10 years